Search for: All records

Evaporative drying from porous media is influenced by wettability and porous structures; altering these parameters impacts capillary effects and hydraulic connectivity, thereby achieving slower or faster evaporation. In this study, water was evaporated from a homogeneous porous column created with ~1165 glass (i.e., hydrophilic) or Teflon (i.e., hydrophobic) 2.38-mm-diameter spheres with an applied heat flux of 1000 W/m2 supplied via a solar simulator; each experiment was replicated five times and lasted seven days. This study investigates the combination of altered wettability on evaporation with an imposed heat flux to drive evaporation, while deploying X-ray imaging to measure evaporation fronts. Initial evaporation rates were faster (i.e., ~1.5 times) in glass than in Teflon. Traditionally, evaporation from porous media is categorized into three periods: constant rate, subsequent falling rate and slower rate period. Due to homogeneous porous structure and similar characteristic pore size (i.e., 0.453 mm), capillary effects were limited, resulting in an insignificant constant evaporation rate period. A sharp decrease in evaporation rate (i.e., falling rate period) was observed, followed by the slower rate period characterized by Fick’s law of diffusion. Teflon samples entered the slower rate period after 70 hours compared to 90 hours in glass, and combined with X-ray visualization, implying a lower rate of liquid island formation in the Teflon samples than the glass samples. The evaporative drying front, visualized by X-rays, propagated faster in glass with a final depth (after seven days) of ~30 mm, compared to ~24 mm in Teflon. Permeability was modeled based on the geometry [e.g., 3.163E-9 m2 (Revil, Glover, Pezard, and Zamora model), 3.287E-9 m2 (Critical Path Analysis)] and experimentally measured for both glass (9.5E-10 m2) and Teflon (8.9E-10 m2) samples. Rayleigh numbers (Ra=2380) and Nusselt (Nu=4.1) numbers were calculated for quantifying natural evaporation of water from fully saturated porous media, Bond (Bo=193E-3) and Capillary (Ca=6.203E-8) numbers were calculated and compared with previous studies. 

Battery energy storage systems (BESS) are increasingly deployed in microgrids due to their benefits in improving system reliability and reducing operational costs. Meanwhile, advanced small modular reactors (SMRs) offer many advantages, including relatively small physical footprints, reduced capital investment, and the ability to be sited in locations not possible for larger nuclear plants. In this paper, we propose a bi-level operational planning model that enables microgrid planners to determine the optimal BESS size and technology while taking into account the optimal long-term (a yearly simulation with a 15-min resolution) operations of a microgrid with SMRs and wind turbines. Case studies are performed using realistic BESS and grid data for two BESS technologies, i.e., Li-Ion battery and compressed air energy storage. Numerical results show the effectiveness of the proposed bi-level model. The pros and cons of the two BESS technologies are also revealed. 

Abstract Engineering innovations—including those in heat and mass transfer—are needed to provide food, water, and power to a growing population (i.e., projected to be 9.8 × 109 by 2050) with limited resources. The interweaving of these resources is embodied in the food, energy, and water (FEW) nexus. This review paper focuses on heat and mass transfer applications which involve at least two aspects of the FEW nexus. Energy and water topics include energy extraction of natural gas hydrates and shale gas; power production (e.g., nuclear and solar); power plant cooling (e.g., wet, dry, and hybrid cooling); water desalination and purification; and building energy/water use, including heating, ventilation, air conditioning, and refrigeration technology. Subsequently, this review considers agricultural thermal fluids applications, such as the food and water nexus (e.g., evapotranspiration and evaporation) and the FEW nexus (e.g., greenhouses and food storage, including granaries and freezing/drying). As part of this review, over 100 review papers on thermal and fluid topics relevant to the FEW nexus were tabulated and over 350 research journal articles were discussed. Each section discusses previous research and highlights future opportunities regarding heat and mass transfer research. Several cross-cutting themes emerged from the literature and represent future directions for thermal fluids research: the need for fundamental, thermal fluids knowledge; scaling up from the laboratory to large-scale, integrated systems; increasing economic viability; and increasing efficiency when utilizing resources, especially using waste products.